With the Creality Space Pi X4 Filament Dry Box, you can dry up to four spools of filament at the same time and keep your filament in top shape!

SpaceDry 4.0 technology – intelligent hot air and active dehumidification

• 360° hot air circulation for constant heat and even drying.
• Desiccant regeneration with automatic regeneration of the desiccant – no refilling necessary!
• Active dehumidification with double fans that blow out the moisture before it causes trouble.
• One-way valve, to keep the chamber sealed after drying.
• Keep dry function that will start drying process if moisture exceeds recommended setpoint.

Compatibility:

• 1 kg & 2 kg spools,
• 1.75 mm & 2.85 mm filament diameter,
• Max. spool size: diameter ≤ 200 mm, width ≤ 150 mm,
• Up to 4 spools simultaneously.

Multicolour printing? Multiple drying? Easy!

The Creality Space Pi X4 Filament Dry Box makes multicolour and multi-material printing a breeze! While you print, the box ensures that your filament stays perfectly dry. So everything runs like clockwork – without stringing, clogging or layer shifts.

Power heating element for power filaments

With two separate 200W PTC heating elements and a max temperature of 80°C, the Creality Space Pi X4 Filament Dry Box even keeps demanding filaments such as PAHT, PA or PC dry. The clever insulation keeps the heat in the chamber and ensures a constant temperature.

Pro Tip: High-temperature drying requires heat-resistant spools!

Two chambers, double the control

The Creality Space Pi X4 Filament Dry Box is equipped with two separate chambers, each of which has its own heating circuit, allowing for different temperatures for different filaments all at the same time!

You can opt for either single or dual-chamber operation

Recommended drying temperatures:

More features:

• Moisture-proof design,
• Easy-to-use, intuitive 3.2-inch touchscreen,
• Intelligent functions such as Active Silent mode, beep sound when drying is complete and additional light,
• Multiple safety features: intelligent self-checks for early detection of problems, automatic stop at abnormal fan speeds, PTC fuse with self-reset at excessive temperatures, NTC sensor at the air outlet for monitoring the temperature and automatic drying pause in the event of problems,
• Practical top/rear outlet design,
• Easy-to-operate slide lock,
• Anti-scald rollers.

Technical specifications:

The post Creality SpacePi X4 Filament Dry Box first appeared on Filament Factory.

The Creality Ceramic Heater Hotend Sock is compatible with all Creality 3D printers using the new ceramic Unicorn hotends. This is essential to help stabilize temperature on the nozzle during intermittent cooling

K1, K1C, K1 Max, K1 SE, Ender 3 V3 KE,CR-10 SE,  Ender 3 V3 Core XZ, Ender 3 V3 Plus Core  XZ

The post Creality Ceramic Heater Hotend Sock first appeared on Filament Factory.