Comments on: Filament Factory PETG™ Arctic White

By: Henco Joubert

Henco Joubert — Wed, 05 Aug 2020 21:23:10 +0000

Really good stuff, hands down the best PETG i’ve ever had

By: Chris van Gerve

Chris van Gerve — Thu, 15 Nov 2018 09:28:45 +0000

Very happy with the arctic white. Printing at 240ºC and bed 65ºC. Printing on masking tape and hairspray

By: Kevin Fourie

Kevin Fourie — Tue, 10 Jul 2018 08:43:41 +0000

Very happy with the arctic white. Once I got the correct settings it is great. printing at 0.15, bed at 80 and hot end 245. it almost sticks too well to the bed. but that is better than it coming loose. I print on klapton tape on the bed it it is the best. I will definitely be getting more PETG ( Super PLA). Great Product!!

By: Stefan Jacobsz

Stefan Jacobsz — Mon, 28 May 2018 12:50:23 +0000

This stuff is super strong, printed very well! I will be ordering again and try some other colours too. Seems much stronger than ABS even.

By: brandon2255p

brandon2255p — Wed, 17 Jan 2018 18:19:28 +0000

Really happy with this plastic. Was able to tune the correct settings fairly quickly.

By: P. Smit

P. Smit — Wed, 27 Sep 2017 12:57:15 +0000

I printed with Filament Factory’s PETG in Black, fluorescent green, Blue and white. All printed very well and I am very satisfied with the results. I found the settings on white required to be a bit different from the other colours. All the other colours print best at 260 deg C hotend temp on my printer. White however was more tricky to find the sweet spot and needed to be printed at lower temp 245 or 250 deg C. You might have to re-calibrate your feeding rate to a lower setting as well than with ABS to prevent blobs on your printing work. I will buy PETG (Super PLA) from Filament Factory again. Good product, nice strength and easy to prinbt with once you got the settings correct. (70 deg C on bed works well for me) I printed with 0.4 mm hotend and 0.2 and 0.3 mm layer thickness.

By: Peter Bardin

Peter Bardin — Sun, 24 Sep 2017 10:15:29 +0000

Different to PLA (says PETG on the roll) but once you change settings on your slicer it prints well. I like the springiness and the lack of shrinkage Bed temperature 70 degrees and hotend 245 degrees worked for me. Lift the Z a little (0.2mm) and slow it down. first layer 15mm/s and the rest between 50 for perimeters and 45 for infill.

By: Neil

Neil — Thu, 27 Jul 2017 07:38:54 +0000

Great colour and awesome layer adhesion. Stephan has been kind enough to help me out with the settings as I am a noob with 3d printing. I get great results at .3mm Layers, but have not printed at higher resolutions yet.